loading
reading
writing
saving
searching
Looking for someone to build one wall on a food truck. (Woonsocket)
compensation:
?
QR Code Link to This Post
I'm building a food truck and need the back wall to this truck built. The old door is already removed and I just need the back wall built to these exact specifications.
Please look at the pictures so you know exactly what I'm looking for.
These are all the specs:
- 88-3/8” x 78” Frame
- Double Stud on both sides
- Double Stud around door
- Double Stud on floor
- Two Nailers on right side (8” and 32” high)
- One 24” x 70” RV Door Installed
- 2” Self Tapping Metal Screws from frame to truck
- All Studs in exact location as diagram (need it like this because of generator shelf and propane shelf that will be installed later)
- One 6/3 Electric Wire ran for generator plug @ 37-1/2” height (Don’t really need you to connect the wire, unless you want to. The wire is already ran to right beside where this wall will be.)
- One ¾” Black Steel Threaded Pipe ran from left wall to location in diagram (pipe already ran right beside new wall, need it to go to right side of wall @ 50” height)
- One flexible propane hose ran from one side of the wall to another (40 ½” on left side and 50” on right side. Have bulkhead fittings for it to go through the wall)
- Exterior covered with ½” Plywood
- Exterior Plywood covered with 3mm Aluminum Panel (Sikaflex 505UV Sealant / Adhesive to stick to Plywood and white metal roofing screws around perimeter for extra security. Want a ¼” gap around the whole perimeter to allow expansion and also all screws pre-drilled a little bigger to allow expansion as well. Sikaflex also around perimeter to cover the 1/4" gap.)
- Interior will have R13 faced insulation and covered with ½” Plywood.
Double Studs on side and floor have to be put in after frame gets screwed to truck so screws will reach the metal frame of the truck. I know a lot of this seems self explanatory, but figured I would say it anyway.
Everything for this project is on site including screws, wood, etc Just need your tools. I know it sounds like a lot, but it is a half day project for some one who knows what they are doing. I just include all details so there is no confusion on exactly what I want and looking for and can be priced accordingly.
I AM NOT LOOKING FOR CONTRACTOR PRICES. THIS IS A HANDYMAN JOB. LOOKING FOR LOWEST BID WITH EXPERIENCE IN HANDYMAN WORK. NO LICENSE NEEDED. LOWEST BID THAT CAN DO IT ASAP WILL GET THE JOB.
Please send your quote, experience you have, and any pictures of similar projects you have done. Would like this done ASAP.
Thanks